Our Services

RTM Homes

Ready-to-Move homes designed and built for First Nations communities — faster, higher quality, and delivered right to your reserve.

RTM — Ready to Move
Iron Alliance RTM home — front entrance rendering with central stone cladding and vinyl siding
Front Entrance — Stone & Vinyl
RTM Homes

The Smart Way to
House Your Community

Ready-to-Move homes are built off-site in a controlled environment, then delivered and set on your prepared foundation. Weather-independent construction means faster timelines — and better quality control than on-site builds.

⚡
Faster Build Times
Weather-independent construction. Homes ready in weeks, not months.
✅
Quality Controlled
Every unit inspected at the factory before delivery to your community.
🗺️
Remote Delivery
We deliver to remote and reserve communities other contractors won't reach.
📐
Custom Floor Plans
Choose from models or work with us to design something tailored to your community.
💰
ISC Funding Compatible
Experienced with capital project approvals and housing authority requirements.
🏡
Northern Ready
Insulation, materials, and systems designed for harsh Canadian winters.
Request RTM Pricing
Renderings

See the Finish Options

Every RTM home can be tailored to your community's taste — from stone cladding and vinyl siding to engineered wood, in any elevation. Here are a few of our current design renderings.

Front entrance rendering with central stone cladding and vinyl siding
Front Entrance
Stone Cladding & Vinyl
Two cladding variations side by side — stone with vinyl and engineered wood
Finish Variations
Stone vs. Wood
Front elevation with stone centre feature and wood-panel wings
Front Elevation
Stone & Wood Blend
Front elevation rendering at dusk with interior lighting
Evening Elevation
Warm Entry Lighting
Rear view rendering with central stone cladding
Rear View
Stone & Vinyl
RTM home rendering finished in white acrylic stucco with foam-insulated wall system
Stucco Finish
White Acrylic Stucco
RTM home rendering in deep blue stucco with stone skirt and foam-insulated wall system
Stucco & Stone
Deep Blue Elevation
Energy Efficiency

Built to Keep the Cold Out

Our stucco wall system is built around closed-cell spray foam and a continuous layer of exterior rigid foam — delivering an envelope that outperforms standard stick-frame homes by a wide margin. Lower heating bills, fewer cold spots, and a home that holds its temperature through a prairie winter.

Standard Batt Wall
R-20
Fiberglass between studs — thermal bridging losses up to 30%.
→
Our Stucco + Foam System
R-32+
Effective whole-wall value — a 50%+ R-rating upgrade.
Closed-Cell Spray Foam
Insulates and Air-Seals in One Pass

Closed-cell spray foam carries an R-value of roughly R-6 to R-7 per inch — nearly double standard fiberglass batts at R-3.2 per inch. It expands into every stud bay, seam, and penetration, eliminating the air leaks that quietly bleed heat all winter. The result is a tighter envelope, better moisture control, and noticeably quieter rooms.

R-6 – R-7 per inch 2× batt performance Air + Vapour barrier
Stucco Wall System
Continuous Exterior Insulation

Our stucco assembly layers rigid foam insulation over the sheathing before the acrylic stucco finish is applied. That continuous foam blanket wraps the entire home — breaking the thermal bridges that travel through wood studs and pushing the whole-wall R-value from a typical R-20 up to R-32 or higher. The stucco skin itself is tough, weather-tight, and low maintenance.

+R-10 – R-12 continuous No thermal bridging Weather-tight finish
Home Models

Choose Your Model

Standard models to get you started — all can be customized. Contact us for pricing based on your community's specifications and delivery location.

The Elk model — side view with stone cladding
Model 01
The Elk
900 – 1,100 sq ft
A compact, efficient single-family home. Perfect for smaller lots or starter housing programs. Easy to deliver and set — even on remote reserves.
2 Bed 1 Bath Single Storey R-28 Insulation
Starting at Contact for Pricing
The Bear model — front entrance with stone cladding
Model 02
The Bear
1,200 – 1,500 sq ft
Our most popular model — a well-proportioned family home with an open-concept main floor and generous bedroom spaces. Built for community living.
3 Bed 2 Bath Single Storey R-32 Insulation
Starting at Contact for Pricing
The Bison model — front elevation at dusk
Model 03
The Bison
1,600 – 2,000 sq ft
Our largest model — designed for extended families. Full basement option available. Delivers the space and dignity every family deserves.
4 Bed 2 Bath 1.5 Storey R-36 Insulation
Starting at Contact for Pricing

Need something different? We offer fully custom floor plans.

Discuss Custom Plans
How RTM Works

From Order to Move-In

01
Consult & Design
We meet with your housing authority or band council to choose a model and customize specs for your community's needs.
02
Site Prep
We handle foundation preparation at your site while the home is being built — saving weeks of total project time.
03
Factory Build
Your home is built in a controlled environment by our skilled team — inspected at every stage for quality assurance.
04
Deliver & Set
We transport and set your home on the prepared foundation, complete all connections, and hand you the keys.

Ready to Build
Homes for Your Community?

Whether you're planning 1 home or 20, we can help. Contact us for a free consultation and pricing specific to your community's location and needs.

Get RTM Pricing →
Quick Facts
✓Delivery to remote reserves
✓ISC capital project compatible
✓Northern climate specifications
✓Full foundation prep available
✓Housing authority experience
✓Fully customizable floor plans